The Juniper J-IPv6: Junos IP version 6 is a two-day course that provides skills in IPv6 operations including Neighbor Discovery, ICMPv6, IPv6 protocol-independent routing, OSPFv3, IS-IS, BGP, RIPng, transitions methods, and troubleshooting methodology and commands supported by the Junos operating system. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and IPv6 protocol operations. This course uses Juniper Networks SRX Series Services Gateways for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. This course is based on Junos OS Release 12.1R1.9.
Course Level: J-IPV6 is an intermediate-level course.
After successfully completing this course, you should be able to:
- Describe the similarities and differences between IP version 4 (IPv4) and IPv6.
- Explain the different extension headers and their uses.
- Identify the different IPv6 address types.
- Explain the IPv6 neighbour discovery process.
- Describe the maximum transmission unit (MTU) discovery process.
- Configure and monitor the Virtual Router Redundancy Protocol (VRRP).
- Define the routing tables used for IPv6 routing.
- Explain and configure static, aggregated, and generated IPv6 routes.
- Identify and explain IPv6 firewall filters.
- Describe and implement OSPFv3 routing.
- Explain and configure IPv6 networks using IS-IS.
- Describe and implement BGP peering sessions using IPv6.
- Identify the different transition methods.
- Explain concepts for using dual-stack.
- Explain and identify the different methods for tunnelling IPv6 traffic.
- Describe a basic troubleshooting method.
- Identify and explain common operational mode commands used for troubleshooting IPv6 problems.
- Explain protocol enhancements in Routing Information Protocol next generation (RIPng).
- Describe and configure RIPng.
Chapter 1: Course Introduction
Chapter 2: Introduction to IPv6 Addressing
- Comparing IPv4 and IPv6
- Extension Headers
- IPv6 Address
- Interface Configuration
- Lab 1: Configuring IPv6 Interfaces
Chapter 3: IPv6 Protocol and Services
- ICMPv6 Overview
- Neighbour Discovery
- MTU Discovery
- Lab 2: Configuring IPv6 Services
Chapter 4: Protocol Independent Routing and Filters
- IPv6 Routing Tables
- Protocol Independent Routing
- Firewall Filters
- Lab 3: Configuring Protocol Independent Routing
Chapter 5: OSPFv3
- OSPFv3 Overview
- OSPFv3 Configuration
- Lab 4: Configuring OSPFv3
Chapter 6: IS-IS
- IS-IS Overview
- IS-IS Configuration
- Lab 5: Configuring IS-IS
Chapter 7: BGP
- BGP Overview
- BGP Configuration
- Lab 6: Configuring BGP
Chapter 8: Transition Methods
- Transition Plans
- Lab 7: Configuring GRE Tunneling
Chapter 9: Troubleshooting
- Basic Troubleshooting Guide
- IPv6 Show Commands
- Lab 8: Troubleshooting
Appendix A: RIPng
- Introduction to RIPng
- Configuring RIPng
- Lab 9: Configuring RIPng (Optional)
- IT professionals
- Network Engineers
- Individuals who are responsible for configuring and monitoring IPv6 in the Junos OS
- Students should have an intermediate-level of networking knowledge and an understanding of the Open Systems Interconnection (OSI) reference model and the TCP/IP protocol suite.
- Students should also attend the Introduction to the Junos Operating System (IJOS), the Junos Routing Essentials (JRE), and the Junos Intermediate Routing (JIR) courses prior to attending this class.