Juniper Networks Training

The CJFV – Configuring Juniper Networks Firewall/IPSec VPN Products course is the first in the ScreenOS curriculum. It is a three-day, instructor-led course that focuses on configuration of the ScreenOS firewall/virtual private network (VPN) products in a variety of situations, including basic administrative access, routing, firewall policies and policy options, attack prevention features, addresses translation, and VPN implementations. This course is based on ScreenOS version 6.2.

The IFVH – Integrating Juniper Networks Firewalls and VPNs into High-Performance Networks course focuses on the ScreenOS features that are typically necessary for large-scale networks, including dynamic routing, virtual systems, traffic shaping, and high availability. Upon completing this course, students should be able to successfully install and configure ScreenOS devices.

Students should also be able to verify that a ScreenOS device is interoperating in the network as desired. Through demonstrations and hands-on labs, students gain experience in configuring, testing, and troubleshooting these advanced features of ScreenOS software.

The JSE – Junos Space Essentials is a three-day course that provides students with the knowledge required to manage the Junos Space appliance and manage devices with Junos Space. Students will understand how to install Junos Space into a multinode Space Fabric, as well as learn how to administer and monitor the Fabric. Centralized Juno’s device management options offered by the Junos Space Network Management Platform will be explored, including configuration backup, synchronization, Junos image distribution, and application of templates.

Students will also learn how to use Junos Space applications, such as Service Now and Service Insight. Students will gain experience installing Junos Space into a multinode Space Fabric, navigating the administrative environment, monitoring the Fabric, performing schema updates, and using Junos Space applications. This course uses the Junos Space virtual appliance for the hands-on component and is based on Junos Space Release 13.3R2.6.

The JND-WAN: Juniper Networks Design WAN course covers best practices, theory, and design principles for Wide Area Network (WAN) design including WAN interconnects, security considerations, virtualization, and management/operations. This course covers both service provider and enterprise WAN design.

The JNCIE-SEC – JNCIE Security Bootcamp five-day course is designed to serve as the ultimate preparation for the Juniper Networks Certified Internet Expert Security exam.

The course focuses on caveats and tips useful for potential test candidates and emphasizes hands-on practice through a series of timed lab simulations. On the final day of the course, students are given a six-hour lab simulation emulating the testing topics and environment from the real exam. This course is based on Junos OS Release 15.1X49-D50.3 for SRX Series devices.

The JNCIE-SP: JNCIE Service Provider Bootcamp course serves as the ultimate preparation for the Juniper Networks Certified Internet Expert—Service Provider exam.

The course focuses on caveats and tips useful for potential test candidates and emphasizes hands-on practice through a series of timed lab simulations. On the final day of the course, students are given a six-hour lab simulation emulating the testing topics and environment from the real exam. All labs in this course are facilitated by Junosphere Cloud (formerly known as Junosphere) virtual lab devices and are available after hours for additional practice time. This course is based on Junos OS Release 12.3.

This three-day course is designed to provide students with MPLS-based Layer 3 virtual private network (VPN) knowledge and configuration examples. The course includes an overview of MPLS Layer 3 VPN concepts, scaling Layer 3 VPNs, Internet access, Interprovider Layer 3 VPNs, and Multicast for Layer 3 VPNs. This course also covers Junos operating system-specific implementations of Layer 3 VPNs. The concepts are put into practice with a series of in-depth hands-on labs, which will allow participants to gain experience in configuring and monitoring Layer 3 VPNs on Junos OS devices. These hands-on labs utilize Juniper Networks vMX Series devices using the Junos OS Release 16.1R3.10, but are also applicable to other MX Series devices.

Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and in device operations. JL3V is an advanced-level course.

The JL2V – Junos Layer 2 VPNs course provides students with MPLS-based Layer 2 virtual private network (VPN) knowledge and configuration examples. The course includes an overview of MPLS Layer 2 VPN concepts, such as BGP Layer 2 VPNs, LDP Layer 2 circuits, FEC 129 BGP autodiscovery, virtual private LAN service (VPLS), Ethernet VPN (EVPN), and Inter-AS Layer 2 VPNs. This course also covers Junos operating system-specific implementations of Layer 2 VPN instances, VPLS, and EVPNs. This course is based on the Junos OS Release 15.1R2.9.

Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and in device operations.

The JMF – Junos MPLS Fundamentals course is designed to provide students with a solid foundation on Multiprotocol Label Switching (MPLS). After introducing concepts such as MPLS forwarding and the structure of the MPLS header, the course will delve into the configuration and operation of the two main label distribution protocols, RSVP and LDP. Special emphasis is given to the central topics of traffic engineering and MPLS traffic protection, including fast reroute, link/node protection, and LDP Loop-Free Alternate.

The concepts are put into practice with a series of in-depth hands-on labs, which will allow participants to gain experience in configuring and monitoring MPLS on Junos OS devices.

The JNCIE-ENT: JNCIE Enterprise Bootcamp course is designed to serve as the ultimate preparation for the Juniper Networks Certified Internet Expert—Enterprise (JNCIE-ENT) exam.

The course focuses on caveats and useful tips for potential test candidates and emphasizes hands-on practice through a series of timed lab simulations. On the final day of the course, students are given a six-hour lab simulation emulating the testing topics and environment from the real exam. This course is based on Junos OS Release 12.1X45-D15.5 for SRX Series devices, and Release 12.3R3.4 for EX Series switches.

The IJOS – Introduction to the Junos Operating System is a three-day instructor-led course that provides students with the foundational knowledge required to work with the Junos OS and to configure Junos devices. The course provides a brief overview of the Junos device families and discusses the key architectural components of the software. Key topics include user interface options with a heavy focus on the command-line interface (CLI), configuration tasks typically associated with the initial setup of devices, interface configuration basics with configuration examples, secondary system configuration, and the basics of operational monitoring and maintenance of Junos devices. The course then delves into foundational routing knowledge and configuration examples including general routing concepts, routing policy, and firewall filters. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and monitoring basic device operations.

RELATED CERTIFICATIONS

• JNCIA-Junos – Juniper Networks Certified Associate

This three-day course is designed to cover best practices, theory, and design principles for overall network design and will serve as the prerequisite course for other design subject areas — data center, security, and WAN.

The JSM – Junos Subscriber Management is a three-day course that provides students with the knowledge required to configure and manage subscriber management on devices running the Junos Operating System. This course focuses on the main configuration components of subscriber management, including subscriber authentication, authorization, and accounting (AAA), Dynamic Host Configuration Protocol (DHCP) local server and DHCP relay/proxy agent, the Point-to-Point Protocol (PPP), subscriber addressing, dynamic profiles, subscriber interfaces, Layer 3 and Layer 2 wholesale services, dynamic firewall services, subscriber class of service (CoS), and dynamic multicast services.

The JAUT – Junos Automation is a five-day course provides students with Juno’s scripting knowledge through hands-on script development. The course includes an overview of Extensible Markup Language (XML), Stylesheet Language Alternative Syntax (SLAX), the Junos template and function library, commit scripts, operation (op) scripts, and event scripts. Through demonstrations and hands-on labs, students will gain experience in automating the Junos operating system and device operations. This course is based on the Junos OS Release 11.1R2.3.

Course Level: JAUT is an intermediate-level course.

The Network and Security Manager Fundamentals (NSMF) is a two-day course that discusses the basic operations of the Network and Security Manager. Key topics include server and domain administration, device configuration, template creation and management, policy creation and management, logging, and report generation. Through demonstrations and hands-on labs, students gain experience in configuring, testing, and troubleshooting features of Network and Security Manager. This is an introductory-level course.

This three-day course discusses the configuration of Juniper Networks JSA Series Secure Analytics (formerly known as Security Threat Response Manager [STRM]) in a typical network environment. Key topics include deploying an STRM device in the network, configuring flows, running reports, and troubleshooting. Through demonstrations and hands-on labs, students will gain experience in configuring, testing, and troubleshooting the STRM device. This course uses the STRMV virtual appliance for the hands-on component. This course is based on STRM software 2012.1R1.

The CSBR – Configuring Juniper Steel-Belted Radius Carrier is a two-day course that discusses the configuration for Juniper Networks Steel-Belted Radius Carrier. Key topics include installation, client configuration, users, authentication, and replication. Through demonstrations and hands-on labs, students will gain experience in configuring, testing, and troubleshooting basic aspects of SBR Carrier.

The Juniper JRE – Junos Routing Essentials is a one-day classroom course provides students with foundational routing knowledge and configuration examples and includes an overview of general routing concepts, routing policy, and firewall filters.

The AJSPT – Advanced Junos Service Provider Troubleshooting is a two-day course that provides students with information about troubleshooting interior gateway protocols, BGP, routing policy, MPLS, Layer 2 and Layer 3 VPNs, multicast, and Class of Service (CoS). Students will gain experience in monitoring and troubleshooting these topics through demonstration as well as hands-on labs. The course exposes students to common troubleshooting commands and tools used to troubleshoot various intermediate to advanced issues.

This five-day course is designed to provide students with detailed coverage of OSPF, IS-IS, BGP, and routing policy. Through demonstrations and hands-on labs, students will gain experience in configuring, monitoring, and troubleshooting the Junos operating system and in monitoring device and protocol operations.

This course uses Juniper Networks vMX Series Routers for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. This course is based on the Junos OS Release 17.1

This three-day course discusses the configuration of Juniper Intrusion Detection and Prevention (IDP) sensors in a typical network environment. Key topics include sensor configuration, creating and fine-tuning security policies, managing attack objects, creating custom signatures, and troubleshooting. This course is based upon IDP software version 4.1 and Security Manager 2007.3. Through demonstrations and hands-on labs, students will gain experience in configuring, testing, and troubleshooting the IDP sensor.

This one-day course meets the business needs of customers who are deploying the attack prevention features of ScreenOS software. Attack Prevention with Juniper Network Firewalls course focuses specifically on the attack-related features and assumes familiarity with ScreenOS software. Upon completing this course, you should be able to return to work and successfully configure and verify the desired attack prevention features. This course is based on ScreenOS version 6.3r14.

Course Level:

Attack Prevention with Juniper Networks Firewalls is an introductory-level course.

This two-day, intermediate-level Advanced Juniper Networks VPN Implementations (AJVI) course focuses on the wide range of options available when configuring virtual private networks (VPNs) using Juniper Networks firewall/VPN products. Students attending the course will learn these various deployments through detailed lectures and hands-on lab exercises. This course is based on Screen OS version 6.3r14.

Course Level:

Advanced Juniper Networks VPN Implementations is an intermediate-level course.

This two-day Junos Intrusion Prevention Systems (JIPS) course is designed to provide an introduction to the Intrusion Prevention System (IPS) feature set (provided by Junos IPS Secure) available on the Juniper Networks SRX Series Services Gateway.

The course covers concepts, ideas, and terminology relating to providing intrusion prevention using the SRX Series platform. Hands-on labs offer students the opportunity to configure various IPS features and to test and analyze those functions. This course is based on the Junos operating system Release 12.1X44-D10.4. JIPS is an intermediate-level course.

This one-day Junos Unified Threat Management (JUTM) course includes detailed coverage of Web filtering, antivirus (AV), antispam, and content filtering. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Unified Threat Management (UTM) features of the Junos operating system. This course is based on the Junos OS Release 12.1X46-D15.3. JUTM is an intermediate-level course.

This one-day Advanced Junos Enterprise Security Troubleshooting (AJEST) course is designed to provide students with information about troubleshooting IPsec, security zones and policies, other security features, and chassis clustering. Students will gain experience in monitoring and troubleshooting these topics through demonstration as well as hands-on labs. The course exposes students to common troubleshooting commands and tools used to troubleshoot various intermediate to advanced issues.

This course uses Juniper Networks SRX Series Services Gateways for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. This course is based on Junos OS Release 12.1R5.5. Advanced Junos Enterprise Security Troubleshooting is an advanced-level course.

This two-day course provides students with intermediate routing knowledge and configuration examples. The course includes an overview of protocol-independent routing features, load balancing and filter-based forwarding, OSPF, BGP, IP tunneling, and high availability (HA) features.

Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and monitoring device operations. This course uses Juniper Networks vSRX Series Services Gateways for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. This course is based on Junos OS Release 18.2R1.9.

The Juniper AJER – Advanced Junos Enterprise Routing is a four-day course designed to provide students with the tools required for implementing, monitoring, and troubleshooting Layer 3 components in an enterprise network. Detailed coverage of OSPF, BGP, class of service (CoS), and multicast is strongly emphasized. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations.

Course Level: JEX is an intermediate-level course.

The Juniper AJERT – Advanced Junos Enterprise Routing Troubleshooting is a one-day instructor-led course that provides students with information about troubleshooting interior gateway protocols, BGP, routing policy, multicast, and Class of Service (CoS). In this course, students will gain experience in monitoring and troubleshooting these topics through demonstration as well as hands-on labs. The course exposes students to common troubleshooting commands and tools used to troubleshoot various intermediate to advanced issues.

The AJEX – Advanced Junos Enterprise Switching is a two-day course provides detailed coverage of virtual LAN (VLAN) operations, Multiple Spanning Tree Protocol (MSTP) and VLAN Spanning Tree Protocol (VSTP), authentication and access control for Layer 2 networks, IP telephony features, class of service (CoS), and monitoring and troubleshooting tools and features supported on the EX Series Ethernet Switches.

The Juniper AJEXT – Advanced Junos Enterprise Switching Troubleshooting is a one-day course that provides students with skills in troubleshooting spanning tree protocols, Q-in-Q tunnelling, port security features, multicast, and a class of service (CoS). Students will gain experience in monitoring and troubleshooting these topics through demonstration as well as hands-on labs. The course exposes students to common troubleshooting commands and tools used to troubleshoot various intermediate to advanced issues.